Department of Airplane Design Technology

Direction: Aviation and Cosmonautics

Major subjects:

  1. Airplane and Helicopter Manufacturing
  2. Quality, Standardization and Certification

Technology of Airplane and Helicopter Manufacture.

Brief annotation of the major subject:

Students study the whole complex of disciplines, which cover the basic spheres of the preparation for production of airplanes and helicopters. As a result of instruction they obtain knowledge about the system approaches to the complex technology of assembly of airplanes and helicopters; about the design procedure of the technical processes of assembling the typical structures of separate units, compartments, sections, assembly units, on previously given technical specifications ;about the directive technologies at aircraft construction enterprise and its structure; about the technological directions of the guarantee of reliability and service life in the sphere of assembly-line production; they study to conduct technological and organizational preparation on the aircraft enterprise and so forth.

Beside the specific for the aircraft design knowledge the graduates acquire vocational abilities and skills in the wide field of base mechanical engineering technologies (CAD/CAM/CAE, blank-stamping production, machining, welding, etc.), which makes it possible to successfully work in practice at any industrial enterprises of Ukraine and foreign countries, where such technologies are adapted.

BACHELOR'S degree

4 years of training

Natural sciences disciplines

Higher mathematics
Computer science
Experimental and theoretical physics
Chemistry
Theoretical mechanics and theory of mechanisms and machines(TMM)
Theoretical mechanics and TMM
Engineering and computer graphics
Aircraft material science
Theoretical bases of control

Vocational and practical disciplines

Bases of aerospace machinery objects modeling
Marketing and management
Engineering bases of aerospace machinery<
Thermodynamics and heat exchange
Aerohydrodynamics
Electrical engineering and electronics
Functional systems and information-measuring systems for aerospace machinery
Physical and chemical bases of technological processes
Integrated computer technologies of designing
Design of machines and mechanisms
Interchangeability and standardization
Mechanics of materials and structures

Optional disciplines

Engineering bases of aerospace machinery
Reliability and effectiveness of aerospace machinery
Structural mechanics and strength of aircraft structures
Bases of aerospace machinery operation
Structure of aeroplanes and helicopters
Procedure of applying protective coatings for aerospace machinery parts
Theoretical bases of aircraft manufacturing
Manufacture of airplanes and helicopters
Engineering bases of volumetric modeling
Welding in aircraft engineering
Physical and chemical bases of technological processes
Preparation procedure for production
CAD used in aircraft engineering equipment

SPECIALIST'S degree

1,5 years of training

Optional disciplines

Special sections of mathematics and mechanics
Labour protection activity in aerospace machinery production
Utilization of aerospace machinery objects
Students’ research activity
Erection procedure
CAD for production technological preparation
Designing of aircraft manufacturing workshops
Certification of aircraft manufacturing
Approval tests of airplanes and helicopters
Facilities and equipment for aircraft manufacturing
Design and manufacture of aerospace machinery objects made of composites

MASTER'S degree

1,5 years of training

Optional disciplines

Special sections of mathematics and mechanics
Labour protection activity in aerospace machinery production
Utilization of aerospace machinery objects
Students rresearch activity
Assembly and erection work procedures
CAD for production technological preparation
Designing of aircraft manufacturing workshops
Certification of aircraft manufacturing
Facilities and equipment for aircraft manufacturing
Resource saving technologies in aircraft construction
Design and manufacture of aerospace machinery objects made of composites
Research practical training

 

PhD degree

3 years of training

Major subject

Manufacture of aircraft machinery

Leading instructors:

Krivtsov Vladimir Stanislavovich - Professor, D. Sc.

Main published works:

  1. Кривцов В.С., Голомысов С.С., Мазниченко С.А., Цыганов В.П. Об определении энергосиловых параметров процесса импульсной резки горячего металла при комбинированной схеме нагружения // Авиационно-космическая техника и технология: сб. научн. трудов, Харьков - Рыбачье, 2000, с.120-125.

    2. With regard to definition of energy power parameters of hot metal pulse cutting process under combined loading.

  2. Кривцов В.С., Мельничук А.П. Особенности описания деформирования тонкостенных цилиндрических деталей при гидродинамической штамповке // Авиационно-космическая техника и технология. Труды Национального аэрокосмического университета им. Н.Е. Жуковского "ХАИ". - Вып. 25.Харьков: 2001, с.28-34.

    3. Peculiarities of description of thin-walled cylindrical parts deformation under hydrodynamic forming.

  3. Кривцов В.С., Брагин А.П., Мельничук А.П. Устройства разгона снаряда в установках для гидродинамической штамповки // Вопросы проектирования и производства конструкций летательных аппаратов. Сборник научных трудов Национального аэрокосмического университета им. Н.Е. Жуковского "ХАИ". - Вып. 27. Харьков: 2001, с.26-33.

Shell acceleration gears used in hydrodynamic forming

Taranenko Mikhael Evgenievich - Professor, D. Sc.

Main published works:

  1. Тараненко М.Е. Интенсификация процесса электрогидравлической штамповки листовых коробчатых деталей // Кузнечно-штамповочное производство - Вып. 9, 2001, с. 19-23.

    2. Intensification of electrohydraulic forming of sheet box parts.

  2. Тараненко М.Е., Жердев Н.С. Влияние технологических особенностей последовательной локальной электрогидравлической штамповки на выбор номенклатуры листовых деталей для изготовления // Национальный аэрокосмический университет им. Н.Е. Жуковского "ХАИ" - ООО "Волчанский агрегатный завод".

Influence of technological properties of sequential local electrohydraulic forming on selection of sheet parts list.

 

Mescheryakov Alexandr Nikolayevich – Associate Professor, Cand. Sc.

Main published works:

  1. Мещеряков А.Н., Цыганов В.П., Павленко А.А., Семенихин Ю.И., Коллеров В.В. Расшифровка видеограмм деформирования прозрачных моделей с координатной сеткой при симметричной и аисмметричной картинах течения металла и выявления зависимости размеров и формы очага деформаций от конструктивных параметров штампа // Авиационно-космическая техника и технология: Труды Гос. аэрокосм. ун-та – Вып. 11 - Харьков, 1999, с.243-247.

    2. Interpretation of videograms of deformation of transparent models with coordinate grid at symmetrical and asymmetrical pictures of metal flow and determination of dependence of deformation sizes and form zone on forming parameters.


  2. Мещеряков А.Н., Цыганов В.П., Мещеряков А.Н., Павленко А.А. Физическое моделирование процесса выдавливания непрерывным деформированием полимерных полупрозрачных заготовок. // Авиационно-космическая техника и технология: сб. научн. трудов, Харьков - Рыбачье, 2000, с.120-125.

Physical simulation of extrusion by continuous deformation of polymeric semi-transparent blanks.


 

Quality, Standardization and Certification


Brief annotation of the major subject:

Students study requirements for the systems of quality management and they are being prepared for the work in the quality services of aviation and other branches of industry .As the basis of training of specialists the world recognized international standards ISO 9000, ISO 14000, ISO 19000. are assumed.

Graduates know how to develop, to introduce and to improve quality management systems.

A student is being prepared for this activity, mastering the disciplines for vocational preparation.

General lectures are supplemented with practical training within all divisions of academic disciplines.

With the fulfillment of control and course works, the students acquire the skills of the development of normative documents, preparation and conducting of audit systems of quality management.

In diploma work each student develops for the interested organization Politics in the field of quality, Manual on the quality, documented procedures, etc. documents.The skill to prepare and to conduct audit systems of quality, to analyze the reasons for nonconformities and to determine the corrective actions, is ensured by the discipline “Certification and Audit of Quality Systems Management”

SPECIALIST’S degree

1 years of training

Norm disciplines

Disciplines for independent study

Quality management and quality control system elements
Standardization
Certification and audit of quality control system

Optional disciplines

International quality standards
Quality improvement methods
Making administrative decisions
Quality in postproduction processes
Metrological guarantee of quality
Quality in mechanical engineering

MASTER’S degree

1 years of training

Norm disciplines

Disciplines for independent study

Systems of quality management
Methods of standardization
Audit procedure in quality management systems

Optional disciplines

Quality international standards
Methods of quality improvement
Management of organization
Making administrative decisions
Quality in postproduction processes
Metrological guarantee of quality
Quality in mechanical engineering
Business foreign language

Leading instructors:

Trofimov Kirill Borisovich– Associate Professor, Cand. Sc.

Main published works:

  1. Трофимов К.Б., Гребеников А.Г., Мялица А.К., Рябченко В.М., Фролов В.Я. Качество и сертификации промышленной продукции. // Учебное пособие / “ХАИ” - Х 1998. – 394 с.

    2. Quality and certification of industrial products.

  2. К.Б. Трофимов, В.В. Рудь. Методы улучшения качества. – Учеб. пособие. Харьков: Нац. аэрокосмический ун-т “Харьк. авиац. ин-т”, 2001. – 44 с.

    3. Quality improvement techniques.

  3. К.Б. Трофимов, В.А. Пильщиков. Сертификация и аудит систем качества - Учеб. пособие. Харьков: Нац. аэрокосмический ун-т “Харьк. авиац. ин-т”, 2001. – 75 с.

    4. Certification and audit of quality systems.

  4. К.Б. Трофимов. Менеджмент качества и элементы системы качества - Учеб. пособие. Харьков: Нац. аэрокосмический ун-т “Харьк. авиац. ин-т”, 2001. – 74 с.

Quality system elements and quality management.

Scherbina Viktor Alexeyevich - Associate Professor, Cand. Sc.

Main published works:

  1. В.А. Щербина, К.Б. Трофимов. Стандартизация. - Учеб. пособие. Харьков: Нац. аэрокосмический ун-т “Харьк. авиац. ин-т”, 2001. – 79 с.

Standardization.

Balevskiy Aleksander Petrovich – Associate Lecturer, leading auditor of quality systems


Main published works:


  1. А.П. Балевский, К.Б. Трофимов. Качество в машиностроении. - Учеб. пособие. Харьков: Нац. аэрокосмический ун-т “Харьк. авиац. ин-т”, 2001. – 176 с.

    2. Quality in mechanical engineering.